Warning Signs of A Potential Roof Problem

Roofing Problems

Winter in the Omaha can wreak havoc on your roof. As your home’s first line of defense against high winds, heavy rains, sleet or snow, its failure to protect can cause great expense, significant damage, and wasted time and money. Roofing Company Omaha Nebraska

Now is the time to give your roof a quick review to ensure that your home is protected. Leaking roof systems can result from several sources. The most common include cracks in flashing around the chimney and vents, worn out or missing shingles, or condensation from inadequate attic ventilation. If your roof is displaying any of the following signs, your roof may be costing you money and leaving your property vulnerable. (http://homepride.net/what-to-consider-when-youre-getting-a-roofing-estimate/)

  • Dark, “dirty-looking” areas on a roof – Possible causes: environmental pollutants; vegetation, fungus or algae; loss of granules due to shingle age.
  • Missing, cracked or curling shingles – Possible cause: shingles being at the end of their useful life.
  • Leakage in the attic after driving rain – Possible cause: leaky or inadequate shingle underlayment or deteriorated flashing.
  • Roof shingle, sheathing and siding decay – Possible cause: poor attic ventilation.
  • Blistering/peeling of outside paint – Possible cause: excessive temperature or high humidity due to poor attic ventilation.
  • Stains on interior ceilings/walls or mold and mildew growth – Possible cause: inadequate or faulty shingle underlayment allowing leakage or inadequate ventilation.
  • Excessive energy costs – Possible cause: insufficient attic ventilation allowing heating/cooling system to run excessively.

If you notice any of these warning signs, give us a call at 402-592-5577 or contact us online. Neglecting your roof can cost you money. A worn out, a damaged roof can:

  • Decrease the value of your home
  • Increase your heating or cooling costs
  • Result in higher replacement costs and additional home repair.

A well-installed, well-maintained roof is one of the most important things you can do for your home. Make sure you use a professional roofing contractor, properly licensed and insured for roofing, to fix your problems and do the job right. Don’t hire just anyone to perform repairs or replace your roof.

10 Roofing Mistakes and How To Avoid Them

Lifted Shingles

Putting a new roof onto a home is an expensive, but necessary, the cost for homeowners. However, a roofing project that is characterized by shoddy or amateur workmanship can lead to higher costs in the long run. Roofing Company Omaha Nebraska.

Your roof is arguably one of the most important aspects of your home. Aside from being one of the most visible parts of a home’s exterior, the roof functions as your essential barrier from all of the elements. Whenever everything is in good shape, this means that your home stays cooler in the summer, warmer in the winter and dry when it rains. A damaged roof can lead to annoying issues, further damage and unwanted exposure to the weather. Because of this, it is important to always have a qualified roofing company take care of any necessary repairs as quickly as possible.

That being said, it is paramount to choose a highly skilled and experienced roofer with a strong reputation to make sure that you avoid these 10 common roofing mistakes:

  1. Covering Old Shingles Rather Than Replacing Them – This is perhaps one of the largest corners that lower quality roofing companies will cut. The proper way to replace a portion or all of a roof is to remove all of the old shingles and replace them with new ones. This is especially true when the shingles were damaged. Placing new shingles on top of old shingles creates a variety of places for moisture and dirt to collect. This can lead to deterioration and damage much more quickly than if the process was done right. Always make sure that your roofing contractor has removed all old roofing materials before installing your new roof.
  2. Reusing Old Flashing – The metal flashing on your roof helps to stop moisture from seeping into your home at vulnerable places such as chimneys, skylights and roof valleys. When replacing a roof, some roofers choose to cut corners by reusing old flashing. While the old flashing may appear to be in good condition, this could lead to potential issues down the line. Talk to your roofer about their plan for replacing the flashing on your roof to make sure that your old flashing is replaced with new flashing that is less likely to wear down.
  3. Improper Moisture Protection – Although your shingles do a great job of deflecting and diverting water off of your roof, it is very important to have proper moisture protection installed underneath. This moisture barrier not only protects your decking from rain but perhaps more importantly from collecting moisture sources such as snow and ice. For your roof to be properly protected against moisture, a high-quality moisture barrier is a must.
  4. Incorrect Fastener Length – Whenever nails that are too short are used to fasten your shingles, you run the risk of your shingles loosening. Not only can this lead to the shifting, but it can also result in your roof requiring premature replacement and repairs. Ensure that nails that go well into the decking are used so that you are safe from shifting and displaced shingles down the road.
  5. Incorrect Nail Placement – In addition to fastener length, nail placement is also very important to the overall integrity of your roof. When nails are placed improperly, it can cause some very serious structural issues. Instead of leaving the nail heads exposed to damaging sun, wind, and moisture, all nails should be placed underneath the top layer of shingles. This can help keep them from corroding, which can eventually lead to holes in your shingles.
  6. Improper Flashing installation – In addition to replacing your flashing, you should make sure that your roofer installs the new flashing properly. If it is misaligned, improperly overlapped or insufficiently fastened, then your roof is not sufficiently prepared to protect you from ice, rain, and snow.
  7. Improper Overhang – Although it does give your home a certain aesthetic appeal, there is a very good reason that your shingles overhang the eaves of your house. If your roofing materials do not hang past the eaves, then you risk wind damage, which can also blow wind underneath the edges of your shingles. Make sure that your roofer gives your roof the proper amount of overhang. To further protect from wind damage, ask to ensure that they are using the correct number of fasteners per shingle for the wind zone that your home is in.
  8. Mismatched Slate Coloring – If you are having a slate roof, rather than a shingled roof installed on your home, then you should be concerned about how well the slate matches. Have your roofer inspect all slate before installing it onto your roof. Even slate that comes from the same source can have a variety of colors. You will want to ensure proper consistency of slate coloring when the slate is on the ground, rather than when it is on your roof.
  9. Improper Ventilation – When thinking about roofing repairs and replacements, many homeowners do not know how important ventilation is. High-quality roofing contractors and materials companies use advanced roofing materials to ensure that your roof is not only structurally sound but properly vented. If your roof is not vented well enough, it can lead to excess heat build-up and damaging moisture collection.
  10. Decking Issues – The decking on your roof lays the foundation for the shingles that are laid upon it. Because o this, it is one of the most important aspects of your home. You will want to make sure that your roofer inspects all decking to make sure that it is in proper shape, and has been installed correctly. Furthermore, it should be properly protected by the elements by moisture barriers, shingles, and other coverings.

Whether you are repairing a roof damaged in a recent storm, or just from normal wear and tear, the above mistakes can make or break the overall life of your roof. Although you should definitely be talking with your roofing contractor about these points, choosing a local, reputable company to do your roofing work can help you avoid many of these common errors. This is especially true after a significant weather event or other occurrences that results in a large number of roofs being damaged. This situation brings in droves of fly-by-night roofing companies that may do a substandard job and then be difficult (or impossible) to contact later on. Your roof is the most important part of your home. Make sure you put it in good hands.

 

Roofing Lingo

Roofing Layout

LEARN SOME OF THE ROOFING LINGO

Roofing Layout

Here are some terms to help you learn the roofing lingo…

Whether you’re building a new home and want a professional to install the roof or you already own a home and you’re needing a new roof installation due to damage or age, HomePride Roofing has you covered. We install all kinds of roofs for residential and commercial buildings. Roofing Company Omaha Nebraska.

Ever wonder what’s going on when the “roofing guys” are on your roof? Read on for a brief version of what’s happening up there. (http://homepride.net/warning-signs-of-a-potential-roof-problem/)

A discussion of roofing comes with its own vocabulary. Below are some of the most common terms and their definitions. (Definitions from: here, here, and here)

  1. Deck: The surface installed over the supporting framing members to which the roofing is applied.
  2. Eaves: The horizontal, lowest edge of a sloped roof that extends beyond the exterior wall.
  3. Rakes– The vertical edges of gable-style roof planes.
  4. Flashing- Pieces of metal or roll roofing used to prevent seepage of water into a building around any intersection or projection in a roof such as vent pipes, chimneys, adjoining walls, dormers, and valleys.
  5. Step flashing: Flashing application method used where a vertical surface meets a sloping roof plane. Individual pieces extend on the roof plane and up the vertical surface and are overlapped and stepped up the roof as shingles are applied.
  6. Drip Edge: A non-corrosive metal lip that keeps shingles up off the deck at roof edges and extends shingles out over eaves and rakes
  7. Underlayment: A layer of asphalt-saturated felt (sometimes referred to as tar paper) which is laid down on a bare deck before shingles are installed to provide additional protection for the deck.
  8. Valley: The internal angle formed by the intersection of two sloping roof planes to provide water runoff.
  9. Ice dam: Condition formed at the lower roof edge by the thawing and refreezing of melted snow on the overhang. Can force water up and under shingles, causing leaks.
  10. Ice-and-water shield: Thin, self-adhering rubberized asphalt membrane applied before underlayment, but over the drip edge at the eaves to help mitigate potential leaks from ice dams
  11. Ridge: The uppermost, horizontal external angle formed by the intersection of two sloping roof planes.
  12. Sheathing: Exterior-grade boards used as a roof deck material.

 

Upon the rooftop…

So, now that we know a little bit of the roofer’s lingo, let’s see just what they do up on your roof.

  1. Preparation
    1. The old shingles and flashings will be removed.
    2. The decking will be swept as clean as possible. Loose sheathing will be reattached, and sheathing will be inspected for damage prior to new shingles being placed.
  2. Barrier placement
    1. Drip edge installed at the eaves
    2. Ice-and-water membrane applied over the drip edge at the eaves
    3. Metal flashing and ice-and-water membrane applied in the valleys as well as any protrusions (plumbing stacks and attic vents, for example) from the roof
    4. Ice-and-water membrane applied to the rakes
    5. Felt underlayment is applied to the whole roof, each strip overlapping the previous layer by several inches
    6. The drip edge applied to the rakes, OVER the ice-and-water membrane and underlayment
  3. Shingle placement and finishing
    1. Starter shingles placed along the eaves extending past the fascia, drip edge, ice-and-water barrier, and underlayment
    2. Shingles applied in overlapping rows from eaves to ridge
    3. Metal step flashing applied with shingles at joints where the roof meets a wall or chimney.
    4. Roofers finish roof using specially-made pieces for capping the ridge.
    5. Roofers make a final pass across the entire roof, ensuring every nail is sealed with a professional strength sealant.

Congratulations! Your All Set!

Thankfully, you won’t need a new roof very often. But, when age or weather damage keeps your roof from doing its job and threatens further damage to your home and belongings, we’re here to help. Home Pride Roofing offers a free consultation and award-winning professional roofing and customer service. We help you work with your homeowner’s insurance to make sure you get what you need at the price you can afford. Give us a call today! We’ve got you covered.

What to Consider When You’re Getting a Roofing Estimate

Roofing Contractor

Is there a pitfall in your roofing plan? When you’re planning your new roof, you want to find a roof that will last for many years. However, if you don’t go about your estimates properly, you could find that the roof you get is not the one that you expected. Roofing Company Omaha Nebraska

Who Is the Company?

As you would with any estimate, you need to get references. Don’t just trust a contractor when they say that they’ll do an excellent job of installing your new roof. Look for a company that not only guarantees the materials but also guarantees the workmanship, so that if there are troubles with your roof installation, you can ensure that you are compensated or that they are addressed. (http://homepride.net/10-roofing-mistakes-and-how-to-avoid-them/)

Also, ensure that the company is upfront about extra costs. You should know all of the potential costs going into a project so that you minimize stressful financial surprises.

What Is the State of Your Roof?

You might think that you only need a roof repair, perhaps a few extra shingles. After all, there’s nothing else that is wrong with your roof. However, entertain the idea that your roof could have more damage than you originally anticipated. Work with an honest company that will give you a true assessment of your roof, telling you whether or not your roof has underlying damage and might need to be completely replaced.

What Are the Options?

As you do roofing estimates, you should not only talk with the company about installation but about the wide variety of materials that are available to you. Look for high-quality materials with a proven record such as Owens Corning roof shingles. For convenience and to improve the look of your home, it’s helpful if they come in different colors to match your siding. Your roofing company should give you a sense of all of the design options when it comes to choosing a product.

Does the Company Treat Your Home as a System?

Your roof, your gutters, and your drains all act together to create an integrated water removal system for your home. Make sure that your roofing company treats your roof as one part of this system. For instance, they might recommend that you add additional roof protections, such as a gutter cover or gutter heating system to avoid water and snow backups.

Does the Company Get the Estimate In On Time?

According to Angie’s List, “if you want a contractor who sticks to their word, consider whether or not they did everything they said they would in regard to the estimate.” Don’t just check estimates — watch the contractor’s behavior. A timely, well itemized, and accurate estimate tells you that this contractor will be one who focuses on quality in workmanship and will respond to your questions.

At HomePride, we know how much you value your home. We’ll work with you to give it the best protection from the elements. Talk with us to learn how to protect your home with Owens Corning roof shingles. Schedule a free estimate today.