LEARN SOME OF THE ROOFING LINGO
Here are some terms to help you learn the roofing lingo…
Whether you’re building a new home and want a professional to install the roof or you already own a home and you’re needing a new roof installation due to damage or age, HomePride Roofing has you covered. We install all kinds of roofs for residential and commercial buildings. Roofing Company Omaha Nebraska.
Ever wonder what’s going on when the “roofing guys” are on your roof? Read on for a brief version of what’s happening up there. (https://homepride.net/warning-signs-of-a-potential-roof-problem/)
- Deck: The surface installed over the supporting framing members to which the roofing is applied.
- Eaves: The horizontal, lowest edge of a sloped roof that extends beyond the exterior wall.
- Rakes– The vertical edges of gable-style roof planes.
- Flashing- Pieces of metal or roll roofing used to prevent seepage of water into a building around any intersection or projection in a roof such as vent pipes, chimneys, adjoining walls, dormers, and valleys.
- Step flashing: Flashing application method used where a vertical surface meets a sloping roof plane. Individual pieces extend on the roof plane and up the vertical surface and are overlapped and stepped up the roof as shingles are applied.
- Drip Edge: A non-corrosive metal lip that keeps shingles up off the deck at roof edges and extends shingles out over eaves and rakes
- Underlayment: A layer of asphalt-saturated felt (sometimes referred to as tar paper) which is laid down on a bare deck before shingles are installed to provide additional protection for the deck.
- Valley: The internal angle formed by the intersection of two sloping roof planes to provide water runoff.
- Ice dam: Condition formed at the lower roof edge by the thawing and refreezing of melted snow on the overhang. Can force water up and under shingles, causing leaks.
- Ice-and-water shield: Thin, self-adhering rubberized asphalt membrane applied before underlayment, but over the drip edge at the eaves to help mitigate potential leaks from ice dams
- Ridge: The uppermost, horizontal external angle formed by the intersection of two sloping roof planes.
- Sheathing: Exterior-grade boards used as a roof deck material.
Upon the rooftop…
So, now that we know a little bit of the roofer’s lingo, let’s see just what they do up on your roof.
- The old shingles and flashings will be removed.
- The decking will be swept as clean as possible. Loose sheathing will be reattached, and sheathing will be inspected for damage prior to new shingles being placed.
- Barrier placement
- Drip edge installed at the eaves
- Ice-and-water membrane applied over the drip edge at the eaves
- Metal flashing and ice-and-water membrane applied in the valleys as well as any protrusions (plumbing stacks and attic vents, for example) from the roof
- Ice-and-water membrane applied to the rakes
- Felt underlayment is applied to the whole roof, each strip overlapping the previous layer by several inches
- The drip edge applied to the rakes, OVER the ice-and-water membrane and underlayment
- Shingle placement and finishing
- Starter shingles placed along the eaves extending past the fascia, drip edge, ice-and-water barrier, and underlayment
- Shingles applied in overlapping rows from eaves to ridge
- Metal step flashing applied with shingles at joints where the roof meets a wall or chimney.
- Roofers finish roof using specially-made pieces for capping the ridge.
- Roofers make a final pass across the entire roof, ensuring every nail is sealed with a professional strength sealant.
Congratulations! Your All Set!
Thankfully, you won’t need a new roof very often. But, when age or weather damage keeps your roof from doing its job and threatens further damage to your home and belongings, we’re here to help. Home Pride Roofing offers a free consultation and award-winning professional roofing and customer service. We help you work with your homeowner’s insurance to make sure you get what you need at the price you can afford. Give us a call today! We’ve got you covered.